Millimeter-wave Technology and Solutions
Home About Us MMW Division MSD Division Products Resources News and Events


Advanced Search

Standard Products
Advanced Products
MSD Capabilities
Sales
Quote Request
Get Acrobat Reader


Standard Products


Mixers, Detectors, & Multipliers

Balanced Mixer (MXP) - A high performance broadband balanced mixer in a compact size that offers low conversion loss and noise figure over a wide range of local oscillator and IF freguencies. Operates with low local oscillator power over seven waveguide bands from 18 to 100 GHz.

Balanced Mixer

Biasable Balanced Mixer (MXB) - This mixer is DC biased to operate with local oscillator power levels as low as 0 dBm. It provides low conversion loss over broad RF and LO bandwidths and is available in four waveguide bands from 33 to 110 GHz.

Biasable Balanced Mixer

General Purpose Detector (DXP) - Provides an economical solution for power detection from 18 to 220 GHz in ten waveguide bands. Offers high sensitivity and full waveguide band coverage without external DC bias or adjustments.

General Purpose Detector

Subharmonic Mixer (MSH) - Operates at a second or third harmonic of the local oscillator frequency, offering broad RF, IF, and LO frequency coverage. Four standard models are offered covering 50 to 200 GHz in four waveguide bands.

Subharmonic Mixer

General Purpose Harmonic Mixer (MHP) - Ideally suited for downconverting millimeter-wave frequencies to intermediate frequencies below 2 GHz by using a local oscillator in the microwave frequency range of 2 to 8 GHz. Offered in seven waveguide bands from 18 to 110 GHz, with full RF waveguide band coverage.

General Purpose Harmonic Mixer

Upconverter (MUP) - Used for translating a microwave or low frequency signal to millimeter-wave frequency output. Single or double sideband models are available in seven waveguide bands from 18 to 110 GHz. Both offer low conversion loss and high output power.

Upconverter

Fullband Frequency Doubler (MUD) - Balanced resistive mode multiplier covering the full waveguide band from wr-28 to WR-06. The corresponding output frequency range is 26.5 to 170 GHz and the output power flatness is typcially ±2.0 dB across the waveguide band. Offered in a standard and high power version.

Fullband Frequency Doubler

Fullband Frequency Tripler (MUT) - Balanced resistive mode multiplier covering full waveguide bands from WR-22 to WR-05. The corresponding output frequency range is 33 to 220 GHz. Offered in a standard and high power version.

Fullband Frequency Tripler



Please note: The outlines shown in the specification sheets may not reflect the latest information. Please contact Millitech for current outline drawings.
Jobs | Visit Us | Contact Us | Report a Problem

Millitech, Inc. • 29 Industrial Drive East • Northampton, MA • 01060 • (413) 582-9620
© 2001-2007 by Millitech, Inc. • All Rights Reserved.

Website development by IDS Consulting