Oscillator, Amplifier and Active Multiplier
Move cursor over the links to see product images
Click the links for more information
The series GDM mechanically-tuned Gunn oscillator is specifically designed to provide repeatable mechanical tuning characteristics by means of a micrometer drive. High power output is achieved with minimal output power variation over the entire tuning range. The oscillator provides broad tuning range with comparable output power from WR-28 to WR-10
Click Here to download the GDM product datasheet
Electrical Specifications
| Model | GDM -28 |
GDM -22 |
GDM -19 |
GDM -15 |
GDM -12 |
GDM -10 |
| Frequency range (GHz) (Note 1) |
26.5-40 | 33-40 | 40-50 | 50-60 | 60-75 | 75-90 | 90-100 |
| DC supply (V/mA) (typ) | 5/1000 | 5/1000 | 5/1000 | 5/1000 | 5/1000 | 5/1000 | 5/1000 |
| Frequency stability (MHz/°C) (typ) | 2 | 3 | 3 | 3 | 4 | 5 | 5 |
| Power stability (dB/°C) (typ) | -0.02 | -0.02 | -0.02 | -0.03 | -0.03 | -0.04 | -0.04 |
| GDM Standard Version (±1% tuning or less) (Note 2 & 3) | |||||||
| Power available (dBm) (min) | 22 | 22 | 20 | 18 | 17 | 17 | 15 |
| GDM Maximum Tuning Version (Note 2) | |||||||
| Power available (dBm) (min) | 18 | 18 | 17 | 16 | 15 | 15 | 13 |
| Tuning bandwidth (GHz) | 6 | 6 | 6 | 6 | 6 | 6 | 8 |
1) Center frequency tolerance ±100 MHz unless otherwise specified.
2) Many combinations of mechanical tuning range and output power are possible. Please consult Millitech for details.
3) Contact Millitech for a solution to your specific requirements. Power output and tuning range are critically dependent on the actual center frequency in this frequency range.
The series GDV voltage-controlled Gunn oscillator provides electronic tuning characteristics by suitably coupling a Gunn device to a tuning varactor. Series GDV provides performance capabilities ranging from nominal electrical tuning to very wide tuning bandwidths. The oscillator is available from 26.5 to 100 GHz.
Click Here to download the GDV product datasheet
Electrical Specifications
| Model | GDV -28 |
GDV -22 |
GDV -19 |
GDV -15 |
GDV -12 |
GDV -10 |
| Frequency range (GHz) (Note 1) |
26.5-40 | 33-40 | 40-50 | 50-60 | 60-75 | 75-90 | 90-100 |
| DC supply (V/mA) (typ) | 5/1000 | 5/1000 | 5/1000 | 5/1000 | 5/1000 | 5/1000 | 5/1000 |
| Frequency stability (MHz/°C) (typ) | 2 | 3 | 3 | 3 | 4 | 5 | 5 |
| Power stability (dB/°C) (typ) | -0.02 | -0.02 | -0.02 | -0.03 | -0.03 | -0.04 | -0.04 |
| GDV Narrow Tuning Version (±100 MHz) (Note 2) | |||||||
| Power available (dBm) (min) | 20 | 20 | 18 | 17 | 17 | 15 | 14 |
| GDV Moderate Tuning Version (±500 MHz) (Note 2) | |||||||
| Power availablity (dBm) (min) | 18 | 18 | 17 | 17 | 16 | 14 | 13 |
1) Center frequency tolerance ±100 MHz unless otherwise specified.
2) Many combinations of voltage tuning range and power output are possible. Please consult Millitech for details.
Millitech manufactures a line of standard, in-line, low noise amplifiers in the 18 to 110 GHz range. These amplifiers utilize the latest in MMIC technology and are designed for easy integration into nearly any millimeter-wave application while providing state-of-the-art performance. These units are manufactured in compact packages.
Click Here to download the LNA product datasheet
Electrical Specifications (Click to enlarge)
Millitech manufactures a line of standard, in-line, power amplifiers in the 18 to 110 GHz range. These amplifiers utilize the latest in MMIC technology and are designed for easy integration into nearly any millimeter-wave application while providing state-of-the-art performance.
Click Here to download the AMP product datasheet
Electrical Specifications (Click to enlarge)
Millitech series PLS Phase Locked Synthesizers provide a cost effective phase locked source in multiple bands between 14.6 and 316.8GHz. Ideally suited for Millitech’s Active Multiplier Chains (series AMC), these compact sources cover many popular millimeter-wave frequency bands.
Click Here to download the PLS product datasheet
Electrical Specifications - Please refer to the product datasheet for electrical specs.
PLS products covering additional bands will be released soon. Please contact Millitech sales for details.
Millitech will engineer custom variations of our standard MMW components, as well as, multi-component assemblies and solutions, with minimal non-recurring engineering (NRE) costs, to meet your specific requirements. Typically these modification are to meet one or more of the following requirements:
- Tuned for specific performance characteristics
- Extended operational temperatures
- MIL/Space qualified
- Hi-rel screening
- RoHS compliant
- ITAR compliant
Click Here for more information on Millitech's custom capabilities, components, assemblies and solutions.
Please contact your local sales representative or Millitech's sales team for information and quoting.