Multiplier and Active Multiplier Chain Products
Move cursor over the links to see product images
Click the links for more information
The series MUD frequency doubler is a balanced resistive mode multiplier covering the full waveguide band from WR-28 to WR-06. The corresponding output frequency range is 26.5 to 170 GHz and the output power flatness is typically ± 2.0 dB across the waveguide band. This frequency doubler is offered in two versions, a standard and high power version. The standard version produces an output power of -15 to +3 dBm, depending upon the input power level and frequency range. The high power version produces an output power of 0 dBm to 10 dBm across an input power range of 21 to 24 dBm, dependent on the frequency range
The series MUT frequency tripler is a balanced resistive mode multiplier covering full waveguide bands from WR-22 to WR-05. The corresponding output frequency range is 33 to 220 GHz. The series MUT is offered in two versions, standard and high power. The standard version produces an output power of -15 to +3 dBm, depending upon the input power level and frequency range. The high power version produces an output power of 3 to 10 dBm across an input power range of 21 to 24 dBm, dependent on the frequency range
Millitech’s line of active multipliers offers the best performance available in the industry. These multipliers are capable of extending the range of sources from 7.5 to 20 GHz coaxial to the complete millimeter-wave spectrum from 26 to 220 GHz in waveguide outputs of WR-28, 22, 19, 15, 10, 08, 05 and 03. as well as K/2.92mm coaxial connectors.
This product is compatible with Millitech's series HSK heat sinks, which offer a number of solutions to help regulate component temperature. These heat sinks come with various screw hole patterns to allow for ease of assembly. Each heat sink features serrated fins to achieve maximum surface area, which helps increase the heat transfer rate.
Millitech will engineer custom variations of our standard MMW components, as well as, multi-component assemblies and solutions, with minimal non-recurring engineering (NRE) costs, to meet your specific requirements. Typically these modification are to meet one or more of the following requirements:
Click Here for more information on Millitech's custom capabilities, components, assemblies and solutions.
Please contact your local sales representative or Millitech's sales team for information and quoting.